Bolt MC Hardware Chain Adjuster Block - Black

Billet aluminum chain adjuster blocks hold the wheel precisely in place while tightening the chain and stay in position even when the axle is removed
Designed to work with only one 12mm (13mm on the KTM) wrench is needed to make chain adjustments
Each andonized 6061 aluminum block has laser etched aligning marks and has anti-seixe pre-applied to threads
Kawasaki chain adjuster blocks include a 22 mm metal locknut to replace the stock cotter pin and castle nut

Bolt MC Hardware Part #: 2009-CHAD-YZ.BK

Fits the Following:

• 2010 Suzuki RMX450Z
• 2002 Yamaha WR250F
• 2003 Yamaha WR250F
• 2004 Yamaha WR250F
• 2005 Yamaha WR250F
• 2006 Yamaha WR250F
• 2007 Yamaha WR250F
• 2008 Yamaha WR250F
• 2009 Yamaha WR250F
• 2011 Yamaha WR250F
• 2003 Yamaha WR450F
• 2004 Yamaha WR450F
• 2005 Yamaha WR450F
• 2006 Yamaha WR450F
• 2007 Yamaha WR450F
• 2008 Yamaha WR450F
• 2009 Yamaha WR450F
• 2011 Yamaha WR450F
• 2002 Yamaha YZ125
• 2003 Yamaha YZ125
• 2004 Yamaha YZ125
• 2005 Yamaha YZ125
• 2006 Yamaha YZ125
• 2007 Yamaha YZ125
• 2008 Yamaha YZ125
• 2009 Yamaha YZ125
• 2010 Yamaha YZ125
• 2011 Yamaha YZ125
• 2012 Yamaha YZ125
• 2002 Yamaha YZ250
• 2003 Yamaha YZ250
• 2004 Yamaha YZ250
• 2005 Yamaha YZ250
• 2006 Yamaha YZ250
• 2007 Yamaha YZ250
• 2008 Yamaha YZ250
• 2009 Yamaha YZ250
• 2010 Yamaha YZ250
• 2011 Yamaha YZ250
• 2012 Yamaha YZ250
• 2002 Yamaha YZ250F
• 2003 Yamaha YZ250F
• 2004 Yamaha YZ250F
• 2005 Yamaha YZ250F
• 2006 Yamaha YZ250F
• 2007 Yamaha YZ250F
• 2008 Yamaha YZ250F
• 2003 Yamaha YZ450F
• 2004 Yamaha YZ450F
• 2005 Yamaha YZ450F
• 2006 Yamaha YZ450F
• 2007 Yamaha YZ450F
• 2008 Yamaha YZ450F