Solid State Sensing Bilge Switch

With the Solid-State Bilge Switch, you can know at a glance if your bilge system is functioning properly.  If the green LED is illuminated, the switch is in stand-by mode.  If both the LEDs are illuminated, the bilge pump should be active.  If not, it's a clear indication that further troubleshooting is required.  Our switch has sensors that activate automatically when water reaches the installed height of the switch in the bilge.  It conserves entergy by running only when water activates the pump.  Similar units use an intermittent pulse that can run down your battery.  Functions in salt and fresh water.  Converts any manual bilge pump to automatic.  Meets or exceeds ABYC and USCG standards.

UNIFIED MARINE Part #: 50010338