EBC XC Series Contour Brake Rotor

The steel used in the EBC rotor blades is a special stainless blend with higher friction effect than normal heat treated stainless steel found on stock discs
Boasts up to 10% improvement in friction effect improving brakes even further
Weight of the X and XC series is reduced by 5-10% by using a 6 only button drive system on a lightweight alloy centre hub, which once again grabs the lead over stock parts
The SD-System uses a square sided rivet with many advantages
The SD-System of square sided buttons means that the rotor can expand inwards and outwards unrestrained and that perfect rotor functionality is retained at any speed or load
This extends the lifetime of the rotor and prevents distortion failures
Keeps the rotor blades perfectly true and flat throughout their life cycle and technically the only reason for a rotor to need replacement will be impact damage or over a very extended number of miles possible rotor wear limits being exceeded
This means that a rotor equipped with the EBC Brakes SD-System could last 5-10 times as long as a conventional rotor built with circular buttons
The drive forces under braking are transmitted over a line contact on the square side of the button compared to the point contact of a circular button

EBC Part #: MD622XC

Fits the Following:

• 2008 Ducati 848 (2 pieces required)
• 2008 Ducati 848 (2 pieces required
  Radial 2 pad caliper)
• 2009 Ducati 848 (2 pieces required)
• 2009 Ducati 848 (2 pieces required
  Radial 2 pad caliper)
• 2010 Ducati 848 (2 pieces required
  Radial 2 pad caliper)
• 2010 Ducati 848 (2 pieces required)
• 2011 Ducati 848 EVO (2 pieces required)
• 2011 Ducati 848 EVO (2 pieces required
  Monoblac front calipers)
• 2012 Ducati 848 EVO (2 pieces required)
• 2013 Ducati 848 EVO (2 pieces required)
• 2003 Ducati 999 (2 pieces required
  
  Std Caliper Mount)
• 2004 Ducati 999 (2 pieces required
  
  Std Caliper Mount)
• 2005 Ducati 999 (2 pieces required
  
  Std Caliper Mount)
• 2006 Ducati 999 (2 pieces required
  
  Std Caliper Mount)
• 2003 Ducati 999R (2 pieces required
  Radial mount caliper)
• 2004 Ducati 999R (2 pieces required
  Radial mount caliper)
• 2005 Ducati 999R (2 pieces required
  Radial mount caliper)
• 2006 Ducati 999R (2 pieces required
  Radial mount caliper)
• 2003 Ducati 999R FILA (2 pieces required
  Radial mount caliper)
• 2006 Ducati 999R Xerox (2 pieces required
  
  Std Caliper Mount)
• 2003 Ducati 999S (2 pieces required
  
  Std Caliper Mount)
• 2004 Ducati 999S (2 pieces required
  
  Std Caliper Mount)
• 2005 Ducati 999S (2 pieces required
  Radial mount caliper)
• 2006 Ducati 999S (2 pieces required
  Radial mount caliper)
• 2011 Ducati Diavel (2 pieces required
  
  Std Caliper Mount)
• 2012 Ducati Diavel (2 pieces required
  
  Std Caliper Mount)
• 2013 Ducati Diavel (2 pieces required
  
  Std Caliper Mount)
• 2009 Ducati Monster 1100 (2 pieces required
  
  Std Caliper Mount)
• 2010 Ducati Monster 1100 (2 pieces required
  
  Std Caliper Mount)
• 2011 Ducati Monster 1100 (2 pieces required
  
  Std Caliper Mount)
• 2009 Ducati Monster 1100 S (2 pieces required
  
  Std Caliper Mount)
• 2010 Ducati Monster 1100 S (2 pieces required
  
  Std Caliper Mount)
• 2011 Ducati Monster 1100 S (2 pieces required
  
  Std Caliper Mount)
• 2011 Ducati Monster 796 (2 pieces required
  
  Std Caliper Mount)
• 2007 Ducati Monster S4R Testastretta (2 pieces required
  Radial 4 pad caliper)
• 2008 Ducati Monster S4R Testastretta (2 pieces required
  Radial 4 pad caliper)
• 2006 Ducati Monster S4Rs (2 pieces required
  Radial 4 pad caliper)
• 2007 Ducati Monster S4Rs Testastretta (2 pieces required
  Radial 4 pad caliper)
• 2008 Ducati Monster S4Rs Testastretta (2 pieces required
  Radial 4 pad caliper)
• 2008 Ducati Monster S4Rs Tricolore (2 pieces required
  Radial 4 pad caliper)
• 2010 Ducati Multistrada 1200 (2 pieces required
  
  Std Caliper Mount)
• 2011 Ducati Multistrada 1200 (2 pieces required
  
  Std Caliper Mount)
• 2012 Ducati Multistrada 1200 (2 pieces required
  
  Std Caliper Mount)
• 2013 Ducati Multistrada 1200 (2 pieces required
  
  Std Caliper Mount)
• 2010 Ducati Multistrada 1200 S (2 pieces required
  
  Std Caliper Mount)
• 2011 Ducati Multistrada 1200 S (2 pieces required
  
  Std Caliper Mount)