EBC XC Series Contour Brake Rotor

The steel used in the EBC rotor blades is a special stainless blend with higher friction effect than normal heat treated stainless steel found on stock discs
Boasts up to 10% improvement in friction effect improving brakes even further
Weight of the X and XC series is reduced by 5-10% by using a 6 only button drive system on a lightweight alloy centre hub, which once again grabs the lead over stock parts
The SD-System uses a square sided rivet with many advantages
The SD-System of square sided buttons means that the rotor can expand inwards and outwards unrestrained and that perfect rotor functionality is retained at any speed or load
This extends the lifetime of the rotor and prevents distortion failures
Keeps the rotor blades perfectly true and flat throughout their life cycle and technically the only reason for a rotor to need replacement will be impact damage or over a very extended number of miles possible rotor wear limits being exceeded
This means that a rotor equipped with the EBC Brakes SD-System could last 5-10 times as long as a conventional rotor built with circular buttons
The drive forces under braking are transmitted over a line contact on the square side of the button compared to the point contact of a circular button

EBC Part #: MD633XC

Fits the Following:

• 1998 Ducati 748 SPS (2 pieces required)
• 1999 Ducati 748 SPS (2 pieces required)
• 2002 Ducati 998 Biposto (2 pieces required
  2 pad calipar)
• 2003 Ducati 998 Biposto (2 pieces required
  2 pad calipar)
• 2004 Ducati 998 Matrix (2 pieces required)
• 2002 Ducati 998 Monoposto (2 pieces required
  2 pad calipar)
• 2003 Ducati 998 Monoposto (2 pieces required
  2 pad calipar)
• 2002 Ducati 998S (2 pieces required
  4 pad calipar)
• 2002 Ducati 998S Bayliss (2 pieces required)
• 2002 Ducati 998S Bostrom (2 pieces required)
• 2008 KTM 1190 RC8 (2 pieces required)
• 2009 KTM 1190 RC8 (2 pieces required)
• 2010 KTM 1190 RC8 (2 pieces required)
• 2011 KTM 1190 RC8 (2 pieces required)
• 2010 KTM 1190 RC8 R (2 pieces required)
• 2011 KTM 1190 RC8 R (2 pieces required)
• 2005 KTM 990 Super Duke (2 pieces required)
• 2006 KTM 990 Super Duke (2 pieces required)
• 2007 KTM 990 Super Duke (2 pieces required)
• 2008 KTM 990 Super Duke (2 pieces required)
• 2009 KTM 990 Super Duke (2 pieces required)
• 2010 KTM 990 Super Duke (2 pieces required)
• 2011 KTM 990 Super Duke (2 pieces required)
• 2009 KTM 990 Super Duke R (2 pieces required)
• 2010 KTM 990 Super Duke R (2 pieces required)
• 2011 KTM 990 Super Duke R (2 pieces required)